|
European Craftsmanship available through RAMCO
|
|
BOERE
|
|
Wide Belt Sanders
|
|
RAMCO is now offering one of the best-known names in European
sanding, BOERE. Located in Waddinxveen, the Netherlands, Boere was established
in 1942. Boere's expertise enables them to deliver tailored solutions to
sanding problems. Their advanced sanding machines allow for the sanding of
solid woods, veneers, MDF, chipboard, fiberboard, plywood, cork, and plastics.
Machines are available in single and multiple sanding units with various
combinations of contact roller, sanding pad or combi-unit. Working widths range
from 600 mm (25") to 1300 mm (52").
|
|
|
|
The Boere "Select" is an excellent sander for the small to medium-sized
company. These sanders are available with one to three sanding units and in
37", 43" and 52" widths. Standard features include: Heavy-duty frame
construction, Electronic sanding belt tracking, Automatic braking device, Power
raising & lowering of feed table, Automatic conveyor belt tracking,
Ammeter, and Sound insulation.
|
|
BOERE "Elite"
|
|
Available for top and bottom sanding applications.
|
|
|
|
The Boere "Elite" sanders are available with one to four sanding units and in
25", 37", 43", and 52" widths. Standard features include: Heavy-duty frame
construction, Electronic sanding belt tracking, Automatic braking device,
Built-in rotating brush unit, Power raising & lowering of feed table,
Automatic conveyor belt tracking, "Air cushion" laminated feed table for
constant sanding pressure, Digital readout, Ammeter, and Sound insulation.
|
|
BOERE "Elite-LAC"
|
|
The Ultimate in Lacquer Sanding
|
|
|
|
The Boere "Elite-LAC" has been specially developed for sanding surfaces as
final preparation before being lacquered. MDF, primer, filler, lacquer
supports, for example melamine, and other similar materials can also be fine
finished. Through the combination of the standard lower sanding height and
optional in-line system, the Elite-LAC would be excellent in a lacquering line.
The Elite-LAC is available with one or two contact rolls and working widths of
43" and 52" widths. Standard features include: Heavy-duty frame construction,
Electronic sanding belt tracking, Automatic braking device, Satining brush
unit, Power raising & lowering of feed table, Automatic conveyor belt
tracking, "Air cushion" laminated feed table for constant sanding pressure,
Vacuum table, Two-speed sanding motors, Sound insulation, and much more!
|
|
"Perfection in Sanding"
|
|
